User's Manual

Table Of Contents
17-157
No policy map is bound to port.
Command Mode:
Port Mode.
Usage Guide:
Only a policy map can be applied to each direction of each port. Policy may not be bound to the port
if it uses the rule or action which is not supported by EFP.
Example:
Bind policy-map p1 to egress Ethernet 1/0/1.
Switch(config)#interface ethernet 1/0/1
Switch(Config-If-Ethernet1/0/1)#service-policy output p1
17.4 service-policy output vlan
Command:
[no] service-policy output <policy-map-name> vlan <vlan-list>
Function:
Applies a policy map to the VLAN interface; no command deletes the specified policy map applied
to the VLAN interface.
Parameters:
output <policy-map-name> applies the specified policy map to the egress of VLAN interface.
Default:
No policy map is bound to VLAN interface.
Command Mode:
Global Mode.
Usage Guide:
Only a policy map can be applied to each direction of each VLAN. Policy may not be bound if it uses
the rule or action which is not supported by EFP.
Example:
Bind policy p1 to egress vlan1.
Switch(config)#service-policy output p1 vlan 1
17.5 set
Command:
set {ip dscp <new-dscp> | ip precedence <new-precedence> | cos <new-cos> | c-vid