User's Manual

11-44
11.28 show ethernet-oam link-events configuration
Command:
show ethernet-oam link-events configuration [interface {ethernet | } <IFNAME>]
Function:
Show configuration of link events on specified or all ports with OAM enabled, including detection
period and threshold of the events and so on.
Parameter:
<IFNAME>, the port that the statistic information of OAM link events needs to be shown, the statistic
information of OAM link events for all ports will be shown if this parameter is not specified.
Command Mode:
Admin mode
Example:
Show configuration of link events on ethernet 1/0/1.
Switch#show ethernet-oam link-events configuration interface ethernet 1/0/1
Ethernet 1/0/1 link-monitor configuration：
event high-threshold low-threshold window(s)
----------------------------------------------------------------------------------------------------
Err-symbol-Period none 1 2
Err-frame-Period none 1 10
Err-frame none 2 5
Err-frame-second-summary none 2 600
----------------------------------------------------------------------------------------------------
Field
Description
Event
Event type
Err-symbol-Period
Errored symbol event
Err-frame-Period
Errored frame period event
Err-frame
Errored frame event
Err-frame-second-summary
Errored frame seconds event
high-threshold
High threshold
low-threshold
Low threshold
window(s)
Detection period in seconds.