User's Manual

75-9
Operation Mode:
VSF Operation Mode.
Usage Guide:
After configured this command, if the vsf link status has changed, the system will receive and
confirm the vsf link status immediately, and detect the vsf topology’s change. This command will be
effective immediately after configured. We suggest using this command when the physical vsf link
is stable.
75.8 vsf priority
Command:
vsf priority <priority>
no vsf priority
Function:
Configure the priority of the VSF members in the VSF group. The no command recovers to be
default of 1. When the device is under the independent operation mode, the priority configuration of
vsf member will become effective immediately; when the device is under the VSF mode, after
configured the priority of vsf member, the newest configuration will be shown in running-config, but
the configuration will become effective after it is saved and restarted.
Parameters:
< priority >: the priority value of VSF member, range is 1 to 32.
Default:
1.
Command Mode:
Global Mode.
Operation Mode:
Independent Operation Mode.VSF Operation Mode.
VSF Role:
VSF Master.
Usage Guide:
Under the independent operation mode, configure the member priority. The member priority is used
for roles election, the larger the member priority value is, and the higher the priority is. The
possibility of the device with higher priority becomes the Master is bigger when it is electing.
Through configuring the different priorities for different devices, appoint one device as Master of
VSF.