User's Manual

75-6
Function:
Configure the logic VSF port. The no command deletes the VSF port.
Parameters:
<port-number>: the number of logic VSF port, value is 1 to 2.
Default:
Do not configure.
Command Mode:
Global Mode.
Operation Mode:
Independent Operation Mode, VSF Operation Mode.
VSF Role:
VSF Master.
Usage Guide:
Configure the logic VSF port. Only two vsf port-group can be configured on the same device, they
are vsf port-group1 and vsf port-group2.
Example:
Configure the logic VSF port.
Switch(config)#vsf port-group 1
75.4 vsf port-group interface ethernet
Command:
vsf port-group interface Ethernet <interface-list>
no vsf port-group interface Ethernet <interface-list>
Function:
After created the logic VSF port, bind the actual physical port under the VSF port mode. The no
command cancels the binding.
Parameters: < interface-list >:
physical port number.
Default:
The physical port is not bond as default.
Command Mode:
VSF Port Mode.
Operation Mode:
Independent Operation Mode, VSF Operation Mode.
VSF Role:
VSF Master.