User's Manual

79-10
vsf member <member-id> description
<text>
no vsf member <member-id>
description
Describe the VSF members. This information
will be only written in the VSF master
configuration file. The no command deletes this
information.
vsf link delay<interval>
no vsf link delay
Configure the down delaying reporting function
of the VSF link, using for avoid link to split and
merge due to changing in short period of time.
The no command will set the time for delay
report to default value.
vsf mac-address persistent <timer |
always>
no vsf mac-address persistent
Configure VSF split group MAC address
retention time. No command deletes the MAC
address retention time.
vsf non-wait port-inactive
no vsf non-wait port-inactive
Detect the VSF link status’ change quickly for
discovering the vsf splitting. The no command
recovers to be the default method.
79.2.2 LACP MAD Configuration
LACP MAD configuration task list:
1. Create the aggregation groups
2. Add the port into the aggregation group, and one is with the active method at least
3. Configure the quick detection (optional)
4. Enable LACP MAD
1. Create the aggregation groups
Command
Explanation
Global Mode
port-group <port-group id>
no Port-group <port-group id>
Create/delete the port-group.
2. Add the port into the aggregation group
Command
Explanation
Global Mode
interface ethernet <port-num>
Enter into the port mode.
Port Mode
port-group <port-group id> mode
<active | passive>
no port-group <port-group id>
Add the port into the aggregation group or let it
quit.