User's Manual

60-8
Switch1 is a layer 2 accessing switch, Switch2 is a layer 3 aggregation switch.
Ethernet 1/0/1 is an access port of Switch1, connects to PC1, it enables 802.1x port-based function and
configures guest vlan as vlan8.
Ethernet 1/0/2 is a hybrid port, connects to PC2, native vlan of the port is vlan1, and configures guest vlan as
vlan8, it joins in vlan1, vlan8 and vlan10 with untag method and enables MAB function.
Ethernet 1/0/3 is an access port, connects to the printer and enables MAB function.
Ethernet 1/0/4 is a trunk port, connects to Switch2.
Ethernet 1/0/4 is a trunk port of Switch2, connects to Switch1.
Ethernet 1/0/1 is an access port, belongs to vlan8, connects to update server to download and upgrade the
client software.
Ethernet 1/0/2 is an access port, belongs to vlan9, connects to radius server which configure auto vlan as
vlan10.
Ethernet 1/0/3 is an access port, belongs to vlan10, connects to external internet resources.
To implement this application, the configuration is as follows:
Switch1 configuration:
(1) Enable 802.1x and MAB authentication function globally, configure username and password of MAB
authentication and radius-server address
Switch(config)# dot1x enable
Switch(config)# mac-authentication-bypass enable
Switch(config)#mac-authentication-bypass username-format fixed username mabuser password mabpwd
Switch(config)#vlan 8-10
Switch(config)#interface vlan 9
Switch(config-if-vlan9)ip address 192.168.61.9 255.255.255.0
Switch(config-if-vlan9)exit
Switch(config)#radius-server authentication host 192.168.61.10
Switch(config)#radius-server accounting host 192.168.61.10
Switch(config)#radius-server key test
Switch(config)#aaa enable
Switch(config)#aaa-accounting enable
(2) Enable the authentication function of each port
Switch(config)#interface ethernet 1/0/1
Switch(config-if-ethernet1/0/1)#dot1x enable
Switch(config-if-ethernet1/0/1)# dot1x port-method portbased
Switch(config-if-ethernet1/0/1)# dot1x guest-vlan 8
Switch(config-if-ethernet1/0/1)#exit
Switch(config)#interface ethernet 1/0/2
Switch(config-if-ethernet1/0/2)# switchport mode hybrid