User's Manual

40-15
neighbor {<ip-address>|<TAG>}
capability orf prefix-list
{<both>|<send>|<receive>}
no neighbor {<ip-address>|<TAG>}
capability orf prefix-list
{<both>|<send>|<receive>}
neighbor {<ip-address>|<TAG>}
dont-capability-negotiate
no neighbor {<ip-address>|<TAG>}
dont-capability-negotiate
neighbor {<ip-address>|<TAG>}
override-capability
no neighbor {<ip-address>|<TAG>}
override-capability
neighbor {<ip-address>|<TAG>}
strict-capability-match
no neighbor {<ip-address>|<TAG>}
strict-capability-match
route update, dynamic capability, outgoing
route filtering capability and the address
family’s capability of supporting the
negotiation. Use these command to enable
these capabilities, its format “no” close these
capabilities .It can also be configured by
commands to not do capability negotiation,
do strict capability negotiation or not care
about the negotiation results.
16
．
Configure Routing Server
Command
Explanation
BGP configuration mode
neighbor {<ip-address>|<TAG>}
route-server-client
no neighbor {<ip-address>|<TAG>}
route-server-client
Route server may configure BGP neighbors
under EBGP environment to reduce the
number of peers that every client has
configured; format “no” of the command
configures this router as route server and
specify the clients it serves, the no
neighbor {<ip-address>|<TAG>}
route-server-client
command can delete
clients.
17
．
Configure Path-selected rules
Command
Explanation
BGP configuration mode
bgp always-compare-med
no bgp always-compare-med
bgp bestpath as-path ignore
no bgp bestpath as-path ignore
bgp bestpath compare-confed-aspath
BGP may change some path-select rules by
configuration to change the best selection
and co
mpare MED under EBGP
environment through these command,
ignore the AS-PATH length, compare the