User's Manual

40-13
（
2
）
Configure the timer value of a particular neighbor
Command
Explanation
BGP configuration mode
neighbor { <ip-address> | <TAG> } timers <keep
alive> <holdtime>
no neighbor { <ip-address> | <TAG> } timers
Configure the keep alive and
holdtime timer of a particular
neighbor; the
no neighbor
{ <ip-address> | <TAG> }
timers command recovers the
default value.
9
．
Adjust BGP announcement Interval
Command
Explanation
BGP configuration mode
neighbor {<ip-address> | <TAG>}
advertisement-interval <seconds>
no neighbor {<ip-address> | <TAG>}
advertisement-interval
Configure the minimum interval among
BGP routes update information; the no
neighbor {<ip-address> | <TAG>}
advertisement-interval command
recovers the default setting.
10
．
Configure the Local Preference Value
Command
Explanation
BGP configuration mode
bgp default local-preference <value>
no bgp default local-preference
Change default local preference; the no bgp
default local-preference command
recovers the default value.
11
．
Enable sending default route
Command
Explanation
BGP configuration mode
neighbor { <ip-address> | <TAG> }
default-originate
no neighbor { <ip-address> | <TAG> }
default-originate
Permit sending default route 0.0.0.0;
the no neighbor { <ip-address> |
<TAG> } default-originate
command cancels sending default
route.