User's Manual

40-12
command deletes a client.
neighbor { <ip-address> | <TAG> } next-hop-self
no neighbor { <ip-address> | <TAG> }
next-hop-self
When sending route, configure
Next-Hop as its address; the no
neighbor { <ip-
address> |
<TAG> } next-hop-self command
cancels the setting.
neighbor { <ip-address> | <TAG> } version
<value>
no neighbor { <ip-address> | <TAG> } version
Specify the BGP version
communicating with BGP
neighbors; the
no neighbor
{ <ip-address> | <TAG> } version
command recovers default setting.
neighbor { <ip-address> | <TAG> } route-map
<map-name> {in | out}
no neighbor { <ip-address> | <TAG> } route-map
<map-name> {in | out}
Apply a route map to incoming or
outgoing routes; the no neighbor
{ <ip-address> | <TAG> }
route-map <map-name> {in | out}
command cancels the setting of
route reflector.
neighbor { <ip-address> | <TAG> }
soft-reconfiguration inbound
no neighbor { <ip-address> | <TAG> }
soft-reconfiguration inbound
Store the route information from
neighbor or peers; the no neighbor
{ <ip-address> | <TAG> }
soft-reconfiguration inbound
command cancels the storage.
neighbor { <ip-address> | <TAG> } shutdown
no neighbor { <ip-address> | <TAG> } shutdown
Shutdown BGP neighbor or peers;
the no neighbor { <ip-address> |
<TAG> } shutdown command
activates the closed BGP neighbor
or peers.
8
．
Adjust BGP Timers
（
1
）
Configure the BGP timer of all the neighbors
Command
Explanation
BGP configuration mode
timers bgp <keep alive> <holdtime>
no timers bgp
Configure the BGP timers of all the
neighbors; the no timer bgp command
recovers the default value.