User's Manual

40-11
no neighbor { <ip-address> | <TAG> }
default-originate [route-map <NAME>]
{ <ip-address> | <TAG> }
default-originate [route-map
<NAME>]
command cancels
sending default route.
neighbor { <ip-address> | <TAG> }
send-community
no neighbor { <ip-address> | <TAG> }
send-community
Configure the community attributes
sent to the neighbor.
neighbor { <ip-address> | <TAG> } timers <keep
alive> <holdtime>
no neighbor { <ip-address> | <TAG> } timers
Configure a particular neighbor’s
keep-alive and hold-time timer; the
no neighbor {<ip-
address> |
<TAG>} timers command recovers
the default value.
neighbor {<ip-address> | <TAG>}
advertisement-interval <seconds>
no neighbor {<ip-address> | <TAG>}
advertisement-interval
Configure the min interval of
sending BGP routing information;
the no neighbor {<ip-address> |
<TAG>} advertisement-interval
command recovers the default
value.
neighbor {<ip-address> | <TAG>} ebgp-multihop
[<1-255>]
no neighbor {<ip-address> | <TAG>}
ebgp-multihop
Configure the allowance of EBGP
connections with networks
connected indirectly; the no
neighbor {<ip-address> | <TAG>}
ebgp-multihop c
ommand cancels
this setting.
neighbor { <ip-address> | <TAG> } weight
<weight>
no neighbor { <ip-address> | <TAG> } weight
Configure BGP neighbor weights;
the no neighbor { <ip-address> |
<TAG> } weight command
recovers the default weights.
neighbor { <ip-address> | <TAG> } distribute-list
{ <access-list-number> | <name> } { in | out }
no neighbor { <ip-address> | <TAG> }
distribute-list { <access-list-number> | <name> }
{ in | out }
Filter neighbor route update; the no
neighbor { <ip-
address> |
<TAG> } distribute-list
{ <access-list-number> |
<name> } { in | out } command
cancels route filtering.
neighbor { <ip-address> | <TAG> }
route-reflector-client
no neighbor { <ip-address> | <TAG> }
route-reflector-client
Configure the current switch as
route reflector and specify a client;
the no neighbor { <ip-address> |
<TAG> } route-reflector-client