User's Manual

40-9
4
．
Configure BGP Confederation
Command
Explanation
BGP configuration mode
bgp confederation identifier <as-id>
no bgp confederation identifier <as-id>
Configure a BGP AS
confederation identifier; the
no bgp confederation
identifier <as-id> command
deletes the BGP AS
confederation identifier.
bgp confederation peers <as-id> [<as-id>..]
no bgp confederation peers <as-id> [<as-id>..]
Configure the AS affiliated to the
AS confederation; the
no bgp
confederation peers <as-id>
[<as-id>..]
command deletes
the AS from the AS
confederation.
5
．
Configure a Route Reflector
（
1
）
The following commands can be used to configure route reflector and its clients.
Command
Explanation
BGP configuration mode
neighbor <ip-address> route-reflector-client
no neighbor <ip-address> route-reflector-client
Configure the current switch as
route reflector and specify a
client. the
no neighbor
<ip-address>
route-reflector-client
commands format deletes a
client.
（
2
）
If there are more than one route reflectors in the cluster, the following commands can
configure cluster-id
Command
Explanation
BGP configuration mode
bgp cluster-id <cluster-id>
no bgp cluster-id
Configure cluster id; format “no” of the no
bgp cluster-id
command cancels the
cluster id configuration.