User's Manual

Table Of Contents
Configuration Guide of SGS-6341-Series
2-33
setting, factory reset, port management, link status and system setting. Users can use the attached
RS232 cable in the package and connect to the console port on the device. After the connection, users
can run any terminal emulation program (Hyper Terminal, ProComm Plus, Telix, Winterm and so on) to
enter the startup screen of the device.
USB Interface
The USB port is a USB2.0 type; it is an interface for uploading/restoring the configuration/firmware.
Alarm Port
The alarm port is an RJ45 type, an interface for monitoring the external devices (such as alarm) when
monitoring external devices has failed.
MGMT Port
The MGMT port is an RJ45 type, an independent interface for Telnet or SSH.
2.1.2 LED Indications
The front panel LEDs indicate instant status of port links, data activity, system operation, stack status and
system power, and helps monitor and troubleshoot when needed.
SGS-6341-24T4X LED Indication
Figure 2-1-4 SGS-6341-24T4X LED panel
SGS-6341-48T4X LED Indication
Figure 2-1-5 SGS-6341-48T4X LED panel
System
LED
Color
Function
PWR
Green Lights to indicate that the Switch has power.
Off Power is off.
SYS Green
Lights to indicate the system diagnosis is completed.
Blinks to indicate system diagnosis is running.