User's Manual

Configuration Guide of SGS-6341-Series
2-32
Chapter 2 INSTALLATION
This section describes the hardware features and installation of the Managed Switch on the desktop or rack
mount. For easier management and control of the Managed Switch, familiarize yourself with its display
indicators, and ports. Front panel illustrations in this chapter display the unit LED indicators. Before
connecting any network device to the Managed Switch, please read this chapter completely.
2.1 Hardware Description
2.1.1 Switch Front Panel
The unit front panel provides a simple interface monitoring the switch. Figure 2-1-1, 2-1-2 and 2-1-3 show the
front panel of the Managed Switches.
SGS-6341-24T4X Front Panel
Figure 2-1-1 SGS-6341-24T4X front panel
SGS-6341-24P4X Front Panel
Figure 2-1-1 SGS-6341-24P4X front panel
SGS-6341-48T4X Front Panel
Figure 2-1-1 SGS-6341-48T4X front panel
■ Gigabit TP interface
10/100/1000BASE-T copper, RJ45 twisted-pair: Up to 100 meters.
■ SFP/SFP+ slots
SFP/SFP+ mini-GBIC slot, SFP (Small Factor Pluggable) transceiver module: From 550 meters
(Multi-mode fiber) to 10/30/50/70/120 kilometers (Single-mode fiber).
■ Console Port
The console port is an RJ45 type, RS232 male serial port connector. It is an interface for connecting a
terminal directly. Through the console port, it provides rich diagnostic information including IP address