User's Manual

Configuration Guide of SGS-6341-Series
1-22
Full IPv6 Support
The SGS-6341 Series provides IPv6 management and enterprise-level secure features such as SSH, ACL,
WRR and RADIUS authentication. It thus helps the enterprises to step in the IPv6 era with the lowest
investment. In addition, you don’t need to replace the network facilities when the IPv6 FTTx edge network is
built.
Robust Layer 2 Features
The SGS-6341 Series can be programmed for basic switch management functions such as port speed
configuration, port aggregation, VLAN, Multiple Spanning Tree Protocol, WRR, bandwidth control and IGMP
snooping. This switch provides 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol functions. By
supporting port aggregation, the SGS-6341 Series allows the operation of a high-speed trunk combined with
multiple ports. It enables up to 16 groups for trunking with a maximum of 8 ports for each group.
Excellent Layer 2 to Layer 4 Traffic Control
The SGS-6341 Series is loaded with powerful traffic management and WRR features to enhance services
offered by telecoms. The WRR functionalities include wire-speed Layer 4 traffic classifiers and bandwidth
limitation which are particularly useful for multi-tenant unit, multi-business unit, Telco, or network service
applications. It also empowers the enterprises to take full advantage of the limited network resources and
guarantees the best in VoIP and video conferencing transmission.
Powerful Security
The SGS-6341 Series supports ACL policies comprehensively. The traffic can be classified by
source/destination IP addresses, source/destination MAC addresses, IP protocols, TCP/UDP, IP precedence,
time ranges and ToS. Moreover, various policies can be conducted to forward the traffic. The SGS-6341
Series also provides IEEE 802.1x port based access authentication, which can be deployed with RADIUS, to
ensure the port level security and block illegal users.
Efficient and Secure Management
For efficient management, the SGS-6341 Series Managed Gigabit Switch is equipped with console, Web and
SNMP management interfaces. With its built-in Web-based management interface, the SGS-6341 Series
offers an easy-to-use, platform-independent management and configuration facility. The SGS-6341 Series
supports standard Simple Network Management Protocol (SNMP) and can be managed via any
standard-based management software. For reducing product learning time, the SGS-6341 Series offers
Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these
switches. Moreover, the SGS-6341 Series offers secure remote management by supporting SSH connection
which encrypts the packet content at each session.