User's Manual

22-38
3. IPv6 Tunnel Configuration
(1) Add/Delete tunnel
Command
Explanation
Global mode
interface tunnel <tnl-id>
no interface tunnel <tnl-id>
Create a tunnel. The NO command
deletes a tunnel.
(2) Configure tunnel description
Command
Explanation
Tunnel Configuration Mode
description <desc>
no description
Configure tunnel description. The NO
command deletes the tunnel description.
(3) Configure tunnel source
Command
Explanation
Tunnel Configuration Mode
tunnel source { <ipv4-address> |
<ipv6-address>| <interface-name> }
no tunnel source
Configure tunnel source end IPv4/IPv6
address. The NO command deletes the
IPv4/IPv6 address of tunnel source end.
(4) Configure Tunnel Destination
Command
Explanation
Tunnel Configuration Mode
tunnel destination {<ipv4-address> |
<ipv6-address>}
no tunnel destination
Configure tunnel destination end
IPv4/IPv6 address. The NO command
deletes the IPv4/IPv6 address of tunnel
destination end.
(5) Configure Tunnel Next-Hop
Command
Explanation
Tunnel Configuration Mode
tunnel nexthop <ipv4-address>
no tunnel nexthop
Configure tunnel next-hop IPv4 address.
The NO command deletes the IPv4
address of tunnel next-hop end.