User's Manual

22-35
(2) Set IPv6 Static Routing
Command
Explanation
Global mode
ipv6 route <ipv6-prefix/prefix-length>
{<nexthop-ipv6-address>|<interface-type
interface-number> |
{<nexthop-ipv6-address> <interface-type
interface-number>}} [distance]
no ipv6 route <ipv6-prefix/prefix-length>
{<nexthop-ipv6-address>|<interface-type
interface-number>
|{<nexthop-ipv6-address> <interface-type
interface-number>}} [distance]
Configure IPv6 static routing. The no
command cancels IPv6 static routing.
2. IPv6 Neighbor Discovery Configuration
(1) Configure DAD Neighbor solicitation Message number
Command
Explanation
Interface Configuration Mode
ipv6 nd dad attempts <value>
no ipv6 nd dad attempts
Set the neighbor query message number
sent in sequence when the interface
makes duplicate address detection. The
no command resumes default value (1).
(2) Configure Send Neighbor solicitation Message Interval
Command
Explanation
Interface Configuration Mode
ipv6 nd ns-interval <seconds>
no ipv6 nd ns-interval
Set the interval of the interface to send
neighbor query message. The NO
command resumes default value (1
second).
(3) Enable and disable router advertisement
Command
Explanation
Interface Configuration Mode
ipv6 nd suppress-ra
no ipv6 nd suppress-ra
Forbid IPv6 Router Advertisement. The
NO command enables IPv6 router
advertisement.