User's Manual

15-19
15.2.3 Example of GVRP
GVRP application:
Figure 15-5 Typical GVRP Application Topology
To enable dynamic VLAN information register and update among switches, GVRP protocol is to be configured
in the switch. Configure GVRP in Switch A, B and C, enable Switch B to learn VLAN100 dynamically so that
two workstations connected to VLAN100 in Switch A and C can communicate with each other through Switch
B without static VLAN100 entries.
Configuration Item
Configuration description
VLAN100
Port 2 -6 of Switch A and C.
Trunk port
Port 11 of Switch A and C, Port 10, 11 of Switch B.
Global GVRP
Switch A, B, C.
Port GVRP
Port 11 of Switch A and C, Port 10, 11 of Switch B.
Connect the two workstation to the VLAN100 ports in switch A and B, connect port 11 of Switch A to port 10 of
Switch B, and port 11 of Switch B to port 11 of Switch C.
PC
PC
Switch A
Switch B
Switch C