SGS-6341-Series Quick Guide

9
7.Setting1000BASE-XforSFP+Port
TheManagedSwitchsupports both1000BASE-Xand10GBASE-X SFP transceiver
bymanual settingand thedefault SFP+port speedis setto 10Gbps.Forexample,
to establishthe ber connection with1000BASE-XSFP transceiverin the ethernet
1/0/25,thefollowingcommandcongurationisrequired:
SGS-6341-Series#cong
SGS-6341-Series(cong)#interface ethernet 1/0/25
SGS-6341-Series(cong-if-ethernet1/0/25)#speed-duplex force1g-full
Figure 7-1 Setting 1000BASE-X Screen