L3 Multi-Port Full Gigabit Stackable Managed Switch SGS-6341-24T4X/SGS-6341-24P4X/SGS-6341-48T4X Quick Installation Guide
Table of Contents 1. Package Contents........................................................................................ 3 2. Switch Management..................................................................................... 4 3. Requirements.............................................................................................. 5 4. Terminal Setup............................................................................................ 6 5. Logon to the Console............................
1. Package Contents Thank you for purchasing PLANET L3 Multi-Port Full Gigabit Stackable Managed Switch, SGS-6341-24T4X/SGS-6341-24P4X/SGS-6341-48T4X. The descriptions of these models are as follows: SGS-6341-24T4X Layer 3 24-Port 10/100/1000T + 4-Port 10G SFP+ Stackable Managed Switch SGS-6341-24P4X Layer 3 24-Port 10/100/1000T 802.
2. Switch Management To set up the Managed Switch, the user needs to configure the Managed Switch for network management. The Managed Switch provides two management options: Out-of-Band Management and In-Band Management. Out-of-Band Management Out-of-band management is the management through Console interface. Generally, the user will use out-of-band management for the initial switch configuration, or when in-band management is not available.
3. Requirements zz Workstations running Windows XP/2003/Vista/7/8/2008/10, MAC OS X or later, Linux, UNIX, or other platforms are compatible with TCP/IP protocols. zz Workstations are installed with Ethernet NIC (Network Interface Card) zz Serial Port Connection (Terminal) The above Workstations come with COM Port (DB9) or USB-to-RS232 converter. The above Workstations have been installed with terminal emulator, such as Tera Term or PuTTY.
4. Terminal Setup To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to serial (console) port of the Managed Switch. The console port of the Managed Switch is DCE already, so that you can connect the console port directly through PC without the need of Null Modem.
5. Logon to the Console Once the terminal is connected to the device, power on the Managed Switch, and the terminal will display “running testing procedures”. Then, the following message asks for the login user name and password. The factory default user name and password are as follows as the login screen in Figure 5-1 appears. Username: admin Password: admin Figure 5-1 Managed Switch Console Login Screen The user can now enter commands to manage the Switch.
6. Configuring IP Address The IP address configuration commands for VLAN1 interface are listed below. Before using in-band management, the Managed Switch must be configured with an IP address by out-of-band management (i.e. console mode). The configuration commands are as follows: SGS-6341-Series# config SGS-6341-Series(config)# interface vlan 1 SGS-6341-Series(config-if-Vlan1)# ip address 192.168.1.254 255.255.255.0 The previous command would apply the following settings for the Managed Switch.
7. Setting 1000BASE-X for SFP+ Port The Managed Switch supports both 1000BASE-X and 10GBASE-X SFP transceiver by manual setting and the default SFP+ port speed is set to 10Gbps.
8. Saving the Configuration In Managed Switch, the running configuration file stores in the RAM. In the current version, the running configuration sequence running-config can be saved from the RAM to FLASH by write command or copy running-config startupconfig command, so that the running configuration sequence becomes the start-up configuration file, which is called configuration save.
9. Starting Web Management The Managed Switch provides a built-in browser interface. You can manage it remotely by having a remote host with Web browser, such as Microsoft Internet Explorer, Mozilla Firefox, Google Chrome or Apple Safari. PC / Workstation with Web Browser 192.168.0.x Managed Switch RJ45/UTP Cable IP Address: 192.168.0.254 Figure 9-1 IP Management Diagram The following shows how to start-up the Web Management of the Managed Switch.
10. Logging in to the Managed Switch 1. Use Internet Explorer 8.0 or above Web browser and enter IP address http://192.168.0.254 to access the Web interface. 2. When the following dialog box appears, please enter the configured username “admin” and password “admin” (or the username/password you have changed via console). The login screen in Figure 10-1 appears.
3. After entering the password, the main screen appears as shown in Figure 10-2. Figure 10-2 Web Main Screen of Managed Switch 4. The Switch Menu on the left of the Web page lets you access all the commands and statistics the Switch provides. Now, you can use the Web management interface to continue the Switch management or manage the Managed Switch by console interface. Please refer to the user manual for more.
11 Saving Configuration via the Web In the Managed Switch, the running configuration file stores in the RAM. In the current version, the running configuration sequence of running-config can be saved from the RAM to FLASH by “Save current running-configurations” function, so that the running configuration sequence becomes the startup configuration file, which is called configuration save.
12. Recovering Back to Default Configuration IP address has been changed or admin password has been forgotten – To reset the IP address to the default IP address “192.168.0.254” or reset the login password to default value, press the hardware reset button on the rear panel for about 10 seconds. After the device is rebooted, you can login the management Web interface within the same subnet of 192.168.0.xx.
13. Customer Support Thank you for purchasing PLANET products. You can browse our online FAQ resource at the PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET switch support team. PLANET online FAQ: http://www.planet.com.tw/en/support/faq.php?type=1 Switch support team mail address: support@planet.com.tw SGS-6341 Series User’s Manual http://www.planet.com.tw/en/support/download.
