Datasheet

SGS-6341-48T4X
2
IP Stacking Management
The SGS-6341-48T4X supports IP stacking function that helps network managers
to easily configure up to 24 switches in the same series via one single IP
address instead of connecting and setting each unit one by one. The IP Stacking
technology groups PLANET SGS-6341 switch series together to enable centralized
management through a single unit, regardless of physical location or switch type,
as long as they are connected to the same local network.
Layer 3 Routing Support
The SGS-6341-48T4X enables the administrator to conveniently boost network
efficiency by configuring Layer 3 static routing manually, and the RIP or OSPF
settings automatically. The RIP can employ the hop count as a routing metric and
prevent routing loops by implementing a limit on the number of hops allowed in
a path from the source to a destination. The OSPF is an interior dynamic routing
protocol for autonomous system based on link state. The protocol creates a
database for link state by exchanging link states among Layer 3 switches, and
then uses the Shortest Path First algorithm to generate a route table based on that
database.
Full IPv6 Support
The SGS-6341-48T4X provides IPv6 management and enterprise-level secure
features such as SSH, ACL, WRR and RADIUS authentication. It thus helps the
enterprises to step in the IPv6 era with the lowest investment. In addition, you don’t
need to replace the network facilities when the IPv6 FTTx edge network is built.
Robust Layer 2 Features
The SGS-6341-48T4X can be programmed for basic switch management functions
such as port speed configuration, port aggregation, VLAN, Multiple Spanning
Tree Protocol, WRR, bandwidth control and IGMP snooping. This switch provides
802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol functions. By
supporting port aggregation, the SGS-6341-48T4X allows the operation of a high-
speed trunk combined with multiple ports. It enables up to 16 groups for trunking
with a maximum of 8 ports for each group.
• High performance Store-and-Forward architecture,
broadcast storm control, port loopback detect
• 16K MAC address table, automatic source address
learning and aging
• Supports VLAN
–
IEEE 802.1Q tag-based VLAN
–
GVRP for dynamic VLAN management
–
Up to 256 VLANs groups, out of 4041 VLAN IDs
–
Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad)
supported
–
Private VLAN Edge (PVE) supported
–
GVRP protocol for Management VLAN
–
Protocol-based VLAN
–
MAC-based VLAN
–
IP subnet VLAN
• Supports Link Aggregation
–
Maximum 12 trunk groups, up to 8 ports per trunk group
–
IEEE 802.3ad LACP (Link Aggregation Control Protocol)
–
Cisco ether-channel (static trunk)
• Supports Spanning Tree Protocol
–
STP, IEEE 802.1D (Classic Spanning Tree Protocol)
–
RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
–
MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol,
spanning tree by VLAN)
–
Supports BPDU & root guard
• Port mirroring to monitor the incoming or outgoing trafc on
a particular port (many to many)
• Provides port mirror (many-to-1)
Quality of Service
• 8 priority queues on all switch ports
• Support for strict priority and WRR (Weighted Round
Robin) CoS policies
• Trafc classication
–
IEEE 802.1p CoS/ToS
–
IPv4/IPv6 DSCP
–
Port-based WRR
• Strict priority and WRR CoS policies
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3; IPv6 MLD v1
and v2 snooping
• Querier mode support
• Supports Multicast VLAN Register (MVR)
IP Stacking
Up to 24 units with SGS-6341 Series
Slave
10G Fiber 10G Fiber
Master
Slave
LACPMSTP
Q-in-Q LLDPQoS
MLD
IGMP
L2/L4
Managed Switch
L2/L4
Managed Switch