Datasheet
SGS-6341-48T4X
1
Powerful Layer 3 Routing Solution for Enterprise and Data Center
Networks
PLANET SGS-6341-48T4X is a Layer 3 Stackable Managed Gigabit Switch
that provides high-density performance, Layer 3 static routing, RIP (Routing
Information Protocol) and OSPF (Open Shortest Path First). With 176Gbps
switching fabric and 4 10Gbps uplink ports, the SGS-6341-48T4X can handle
extremely large amounts of data in a secure topology linking to an enterprise
backbone or high capacity servers. The powerful WRR (Weighted Round Robin)
and network security features make the SGS-6341-48T4X perform effective
data traffic control for ISP and enterprise VoIP, video streaming, and multicast
applications.
High Performance 10Gbps Ethernet Capacity
The four SFP+ slots built in the SGS-6341-48T4X boasts a high-performance
switch architecture that is capable of providing non-blocking switch fabric and
wire-speed throughput as high as 176Gbps, which greatly simplifies the tasks of
upgrading the LAN for catering to increasing bandwidth demands. Each of the
SFP+ slots supports Dual-Speed, 10GBASE-SR/LR or 1000BASE-SX/LX, meaning
the administrator now can flexibly choose the suitable SFP/SFP+ transceiver
according to the transmission distance or the transmission speed required to
extend the network efciently.
Layer 3 48-Port 10/100/1000T + 4-Port 10G SFP+ Stackable
Managed Switch
Physical Ports
• 48 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
• 4 10GBASE-SR/LR SFP+ slots, compatible with
1000BASE-SX/LX/BX SFP
• RJ45 to DB9 console interface for switch basic
management and setup
IP Stacking
• Connects with stack member via both Gigabit TP and SFP
interfaces
• Single IP address management, supporting up to 24 units
stacked together
IP Routing Features
• IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3,
BGP4/4+
• Routing interface provides per VLAN routing mode
• VRRPv1/v3 protocol for redundant routing deployment
• Supports route redistribution
Multicast Routing Features
• Supports PIM-DM (Protocol Independent Multicast –
Dense Mode) and PIM-SM (Protocol Independent Multicast
– Sparse Mode) and PIM-SSM (Protocol Independent
Multicast – Source Specic Multicast)
• Supports DVMRP (Distance Vector Multicast Routing
Protocol)
• Supports IGMP v1/v2/v3 and MLD v1/v2
Layer 2 Features
• Complies with the IEEE 802.3, IEEE 802.3u, IEEE
802.3ab, IEEE 802.3z Gigabit Ethernet standard
• Supports auto-negotiation and half-duplex/full-duplex
modes for all 10BASE-T, 100BASE-TX and 1000BASE-T
ports
• Auto-MDI/MDI-X detection on each RJ45 port
• Prevents packet loss ow control
–
IEEE 802.3x pause frame ow control in full-duplex
mode
–
Back-pressure ow control in half-duplex mode
48 x 10/100/1000BASE-T RJ45 Ports
1 x USB 2.0
4 x 1/10G SFP+ Slots
RJ45 Type Console
Ethernet MGMT Port