SGS-6341-Series User Manual

6-3
cluster member {nodes-sn <nodes-sn> |
mac-address <mac-addr> [id <member-id> ] |
auto-to-user}
no cluster member {id <member-id> |
mac-address <mac-addr>}
Add or remove a member switch.
3. Configur
e attributes of the clus
ter in the commander switch
Command Explanation
Global Mode
cluster auto-add
no cluster auto-add
Enable or disable adding newly
discovered candidate switch to the
cluster.
cluster member auto-to-user
Change automatically added
members into manually added ones.
cluster keepalive interval <second>
no cluster keepalive interval
Set the keep-alive interval of the
cluster.
cluster keepalive loss-count <int>
no cluster keepalive loss-count
Set the max. number of lost
keep-alive messages that can be
tolerated in the cluster.
Admin Mode
clear cluster nodes [nodes-sn
<candidate-sn-list> | mac-address
<mac-addr>]
Clear nodes in the list of candidate
switches maintained by the switch.
4. Configur
e attributes of the cluster i
n the candidate switch
Command Explanation
Global Mode
cluster keepalive interval <second>
no cluster keepalive interval
Set the keep-alive interval of the
cluster.
cluster keepalive loss-count <int>
no cluster keepalive loss-count
Set the max. number of lost
keep-alive messages that can be
tolerated in the clusters.
User’s Manual of SGS-6341 series