SGS-6341-Series User Manual

4-11
2. Configure SNMP community string
Command Explanation
Global Mode
snmp-server community {ro | rw} {0 | 7}
<string> [access {<num-std>|<name>}]
[ipv6-access
{<ipv6-num-std>|<ipv6-name>}] [read
<read-view-name>] [write
<write-view-name>]
no snmp-server community <string>
[access {<num-std>|<name>}]
[ipv6-access
{<ipv6-num-std>|<ipv6-name>}]
Configure the community string for the switch;
the no command deletes the configured
community string.
3. Configure IP address of SNMP management station
Command Explanation
Global Mode
snmp-server securityip { <ipv4-address> |
<ipv6-address> }
no snmp-server securityip
{ <ipv4-address> | <ipv6-address> }
Configure IPv4/IPv6 security address which is
allowed to access the switch on the NMS; the
no command deletes the configured security
address.
snmp-server securityip enable
snmp-server securityip disable
Enable or disable secure IP address check
function on the NMS.
4. Configure engine ID
Command Explanation
Global Mode
snmp-server engineid <engine-string>
no snmp-server engineid
Configure the local engine ID on the switch.
This command is used for SNMP v3.
5. Configure user
Command Explanation
Global Mode
snmp-server user <use-string>
<group-string> [{authPriv | authNoPriv}
auth {md5 | sha} <word>] [access
Add a user to an SNMP group. This command
is used to configure USM for SNMP v3.
User’s Manual of SGS-6341 series