SGS-6341-Series User Manual

4-3
aaa authorization config-commands
no aaa authorization config-commands
Enable command authorization function
for the login user with VTY (login with
Telnet and SSH). The no command
disables this function. When enabling
this command and configuring command
authorization manner, it will request to
authorize when executing some
commands.
authentication securityip <ip-addr>
no authentication securityip <ip-addr>
Configure the secure IP address to login
to the switch through Telnet: the no
command deletes the authorized Telnet
secure address.
authentication securityipv6 <ipv6-addr>
no authentication securityipv6
<ipv6-addr>
Configure IPv6 security address to login
to the switch through Telnet; the no
command deletes the authorized Telnet
security address.
authentication ip access-class
{<num-std>|<name>}
no authentication ip access-class
Binding standard IP ACL protocol to login
with Telnet/SSH/Web; the no form
command will cancel the binding ACL.
authentication ipv6 access-class
{<num-std>|<name>}
no authentication ipv6 access-class
Binding standard IPv6 ACL protocol to
login with Telnet/SSH/Web; the no form
command will cancel the binding ACL.
authentication line {console | vty | web}
login method1 [method2 …]
no authentication line {console | vty | web}
login
Configure authentication method list with
Telnet.
authentication enable method1
[method2 …]
no authentication enable
Configure the enable authentication
method list.
authorization line {console | vty | web}
exec method1 [method2 …]
no authorization line {console | vty | web}
exec
Configure the authorization method list
with Telnet.
authorization line vty command <1-15>
{local | radius | tacacs} (none|)
no authorization line vty command <1-15>
Configure command authorization
manner and authorization selection
priority of login user with VTY (login with
Telnet and SSH). The no command
recovers to be default manner.
accounting line {console | vty} command
Configure the accounting method list.
User’s Manual of SGS-6341 series