SGS-6341-Series User Manual

3.2.1.3 Global Mode
Type the config command under Admin Mode to enter the Global Mode prompt “Switch(config)#”. Use the
exit command under other configuration modes such as Port Mode, VLAN mode to return to Global Mode.
The user can perform global configuration settings under Global Mode, such as MAC Table, Port Mirroring,
VLAN creation, IGMP Snooping start and STP, etc. And the user can go further to Port Mode for configuration
of all the interfaces.
 Interface Mode
Use the interface command under Global Mode to enter the interface mode specified. Switch provides three
interface types: 1. VLAN interface; 2. Ethernet port; 3. port-channel, according to the three interface
configuration modes.
Interface Type Entry Operates Exit
VLAN Interface
Type interface vlan <Vlan-id>
command under Global Mode.
Configure switch IPs, etc Use the exit command
to return to Global
Mode.
Ethernet Port
Type interface Ethernet
<interface-list> command
under Global Mode.
Configure supported
duplex mode, speed, etc.
of Ethernet Port.
Use the exit command
to return to Global
Mode.
port-channel
Type interface port-channel
<port-channel-number>
command under Global Mode.
Configure port-channel
related settings such as
duplex mode, speed, etc.
Use the exit command
to return to Global
Mode.
 VLAN Mode
Using the vlan <vlan-id> command under Global Mode to enter the corresponding VLAN Mode. Under
VLAN Mode the user can configure all member ports of the corresponding VLAN. Run the exit command
to exit the VLAN Mode to Global Mode.
 DHCP Address Pool Mode
Type the ip dhcp pool <name> command under Global Mode to enter the DHCP Address Pool Mode
prompt “Switch(Config-<name>-dhcp)#”. DHCP address pool properties can be configured under DHCP
Address Pool Mode. Run the exit command to exit the DHCP Address Pool Mode to Global Mode.
 ACL Mode
ACL type Entry Operates Exit
Standard IP ACL
Mode
Type ip access-list
standard command under
Global Mode.
Configure parameters
for Standard IP ACL
Mode.
Use the exit
command to return
to Global Mode.
Extended IP ACL
Mode
Type ip access-list
extended command under
Global Mode.
Configure parameters
for Extended IP ACL
Mode.
Use the exit
command to return
to Global Mode.
3-12
User’s Manual of SGS-6341 series