SGS-6341-Series User Manual

54-8
savi ipv6 mac-binding-limit
<limit-num>
no savi ipv6 mac-binding-limit
Configure the corresponding dynamic
binding number for the same MAC
address, no command restores the
default value. Note: The binding number
only limits the dynamic binding, but does
not limit the static binding number.
11. Configure the check mode for SAVI conflict binding
Command Explanation
Global Mode
savi check binding <simple | probe>
mode
no savi check binding mode
Configure the check mode for the
conflict binding, no command deletes
the check mode.
12. Enable or disable user authentication
Command Explanation
Port Mode
savi ipv6 check source [ip-address
mac-address | ip-address |
mac-address]
no savi ipv6 check source
Enable the control authentication
function for user, no command disables
the function.
13. Enable or disable DHCPv6 trust of port
Command Explanation
Port Mode
ipv6 dhcp snooping trust
no ipv6 dhcp snooping trust
Enable DHCPv6 trusted port, no
command disables the trusted function.
(port is translated from trusted port into
untrusted port)
14. Enable or disable ND trust of port
Command Explanation
Port Mode
ipv6 nd snooping trust
no ipv6 nd snooping trust
Configure a port as slaac trust and RA
trust, no command deletes the port’s trust
function.
User’s Manual of SGS-6341 series