SGS-6341-Series User Manual

S
tep 5: Configure pppoe intermediate-agent identifier-string as “efgh”, comb
o mode as spv,
delimiter of Slot ID and Port ID as “#”, delimiter of Port ID and Vlan ID as “/”.
Switch(config)#pppoe intermediate-agent type tr-101 circuit-id identifier-string efgh option
spv delimiter # delimiter /
Step 6: Configure circuit-id value as bbbb on port ethernet1/2.
Switch(config-if-ethernet1/2)#pppoe intermediate-agent circuit-id bbbb
Step 7: Configure remote-id as xyz on ethernet1/3.
Switch(config-if-ethernet1/3)#pppoe intermediate-agent remote-id xyz
circuit-id value is ”bbbb”, remote-id value is ”0a0b0c0d0e0f” for the added vendor tag of
port ethernet1/2.
circuit-id value is ”efgh eth 01#003/1234”, remote-id value is ”xyz” for the added vendor
tag of port ethernet1/3.
51.4 PPPoE Intermediate Agent Troubleshooting
 Only switch enables global PPPoE intermediate agent firstly, this function can be run on
port.
 Configure a trusted port at least, and this port can connect to server.
 Vendor tag strip function must be configured by trusted port.
 Circuit-id override priority is: pppoe intermediate-agent circuit-id < pppoe
intermediate-agent identifier-string option delimiter < pppoe intermediate-agent
access-node-id.
51-137
User’s Manual of SGS-6341 series