SGS-6341-Series User Manual

pppoe intermediate-agent
no pppoe intermediate-agent
Enable PPPoE Intermediate Agent
function of port.
pppoe intermediate-agent vendor-tag strip
no pppoe intermediate-agent vendor-tag
strip
Set vendor tag strip function of port.
pppoe intermediate-agent trust
no pppoe intermediate-agent trust
Set a port as trusted port.
pppoe intermediate-agent circuit-id
<string>
no pppoe intermediate-agent circuit-id
Set circuit-id of port.
pppoe intermediate-agent remote-id
<string>
no pppoe intermediate-agent remote-id
Set remote-id of port.
51.3 PPPoE Intermediate Agent Typical Application
PPPoE Intermediate Agent typical application is as follows:
Figure 51-4: PPPoE IA typical application
Both host and BAS server run PPPoE protocol and are connected with Layer 2 Ethernet switch
that enables PPPoE Intermediate Agent function.
Typical configuration (1) in the following:
Step 1: Switch enables global PPPoE IA function, MAC as 0a0b0c0d0e0f.
Switch(config)# pppoe intermediate-agent
Step 2: Configure port ethernet1/1 which connect server as trusted port, and configure vendor
tag strip function.
Switch(config-if-ethernet1/1)#pppoe intermediate-agent trust
Switch(config-if-ethernet1/1)#pppoe intermediate-agent vendor-tag strip
51-135
User’s Manual of SGS-6341 series