SGS-6341-Series User Manual

Switch(config-if-ethernet1/2)#mac-authenticatio
n-bypass enable
Switch(config-if-ethernet1/2)#mac-authentication-bypass enable guest-vlan 8
Switch(config-if-ethernet1/2)#exit
Switch(config)#interface ethernet 1/3
Switch(config-if-ethernet1/3)#switchport mode access
Switch(config-if-ethernet1/3)#mac-authentication-bypass enable
Switch(config-if-ethernet1/3)#exit
Switch(config)#interface ethernet 1/4
Switch(config-if-ethernet1/4)# switchport mode trunk
50.4 MAB Troubleshooting
If a problem happens when using MAB function, please check whether the problem is caused
by the following reasons:
 Make sure global and port MAB function are enabled;
 Make sure the correct username and password of MAB authentication are used;
 Make sure the radius-server configuration is correct.
50-128
User’s Manual of SGS-6341 series