SGS-6341-Series User Manual

radius-server timeout <seconds>
no radius-server timeout
To configure the timeout value for the
RADIUS server. The no form of this
command will restore the default
configuration.
radius-server accounting-interim-update
timeout <seconds>
no radius-server
accounting-interim-update timeout
To configure the update interval for
accounting. The no form of this command
will restore the default configuration.
5. Configure the IP address of the RADIUS NAS
Command Explanation
Global Mode
radius nas-ipv4 <ip-address>
no radius nas-ipv4
To configure the source IP address for the
RADIUS packets for the switch.
radius nas-ipv6 <ipv6-address>
no radius nas-ipv6
To configure the source IPv6 address for
the RADIUS packets for the switch.
47.3 RADIUS Typical Examples
47.3.1 IPv4 RADIUS Example
10.1.1.2
10.1.1.1
RADIUS Server
10.1.1.3
Figure 47-2: The Topology of IEEE802.1x configuration
A computer connects to a switch, of which the IP address is 10.1.1.2 and connected with a
RADIUS authentication server without Ethernet1/2; IP address of the server is 10.1.1.3 and
the authentication port is defaulted at 1812, accounting port is defaulted at 1813.
47-113
User’s Manual of SGS-6341 series