SGS-6341-Series User Manual

switchport mac-address dynamic
maximum <value>
no switchport mac-address dynamic
maximum
Enable and disable the number limitation
function of MAC on the ports.
switchport arp dynamic maximum <value>
no switchport arp dynamic maximum
Enable and disable the number limitation
function of ARP on the ports.
switchport nd dynamic maximum <value>
no switchport nd dynamic maximum
Enable and disable the number limitation
function of ND on the ports.
2. Enable the number limitation function of MAC and IP in VLAN
Command Explanation
VLAN Mode
vlan mac-address dynamic maximum
<value>
no vlan mac-address dynamic maximum
Enable and disable the number limitation
function of MAC in the VLAN.
VLAN Interface Mode
ip arp dynamic maximum <value>
no ip arp dynamic maximum
Enable and disable the number limitation
function of ARP in the VLAN.
ipv6 nd dynamic maximum <value>
no ipv6 nd dynamic maximum
Enable and disable the number limitation
function of NEIGHBOR in the VLAN.
3. Configure the timeout value of querying dynamic MAC
Command Explanation
Global Mode
mac-address query timeout <seconds>
Configure the timeout value of querying
dynamic MAC.
4. Configure the violation mode of ports
Command Explanation
Port Mode
switchport mac-address violation {protect
| shutdown} [recovery <5-3600>]
no switchport mac-address violation
Set the violation mode of the port, the no
command restores the violation mode to
protect.
43-95
User’s Manual of SGS-6341 series