SGS-6341-Series User Manual

Figure 42-14: User Joining Guest VLAN
As illustrated in the above figure, on th
e swit
ch
port Ethernet1/2, the 802.1x feature is enabled,
and the VLAN10 is set as the port’s Guest VLAN. Before the user gets authenticated or when
the user fails to do so, port Ethernet1/2 is added to VLAN10, allowing the user to access the
Update Server.
Figure 42-15: User Being Online, VLAN Being Offline
As illustrated in the above figure, when the users are online after a successful authentication,
the authentication server will assign VLAN5, which makes both the user and Ethernet1/6 in
VLAN5, allowing the user to access the Internet.
The following are configuration steps:
# Configure RADIUS server.
Internet
SWITCH
Ethernet1/
2
Ethernet1/3
VLAN10
VLAN2
Update server Authenticator server
Ethernet1/6
VLAN5
User
Update server Authenticator server
VLAN5
Ethernet1/3
VLAN10
VLAN2
SWITCH
Ethernet1/
2
Ethernet1/6
Internet
User
42-88
User’s Manual of SGS-6341 series