SGS-6341-Series User Manual

2) Configure access mana
gement method for the port: MAC-based or port-based
3) Configure expanded 802.1x function
4) Configure IPv6 passthrough function of the port
3. User access devices related property configuration (optional)
1. Enable 802.1x function
Command Explanation
Global Mode
dot1x enable
no dot1x enable
Enables the 802.1x function in the switch and ports; the no
command disables the 802.1x function.
dot1x privateclient enable
no dot1x privateclient enable
Enables the switch force client software using private
802.1x authentication packet format. The no command will
disable this function.
dot1x user free-resource
<prefix> <mask>
no dot1x user free-resource
Sets free access network resource for unauthorized dot1x
user. The no command close the resource.
dot1x unicast enable
no dot1x unicast enable
Enable the 802.1x unicast passthrough function of switch;
the no operation of this command will disable this function.
2. Access management unit property configuration
1) Configure port authentication status
Command Explanation
Port Mode
dot1x port-control
{auto|force-authorized|force-
unauthorized }
no dot1x port-control
Sets the 802.1x authentication mode; the no command
restores the default setting.
42-84
User’s Manual of SGS-6341 series