SGS-6341-Series User Manual

b. Specify multiple permit or deny rules
Command Explanation
Standard IPv6 ACL Mode
[no] {deny | permit} {{<sIPv6Prefix/sPrefixlen>} |
any-source | {host-source <sIPv6Addr> }}
Creates a standard
name-based IPv6 access
rule; the no form command
deletes the name-based
standard IPv6 access rule.
c. Exit name-based standard IP ACL configuration mode
Command Explanation
Standard IPv6 ACL Mode
exit
Exits name-based standard
IPv6 ACL configuration mode.
2. Configuring packet filtering function
(1) Enable global packet filtering function
Command Explanation
Global Mode
firewall enable
Enables global packet filtering function.
firewall disable
Disables global packet filtering function.
3. Configuring time range function
（1）Create the name of the time range
Command Explanation
Global Mode
time-range <time_range_name>
Create a time range named
time_range_name.
no time-range <time_range_name>
Stop the time range function named
time_range_name.
（2）Configure periodic time range
Command Explanation
Time range Mode
41-62
User’s Manual of SGS-6341 series