SGS-6341-Series User Manual

2. Configure the IGMP Snooping
Command Explanation
Global Mode
ip igmp snooping vlan <vlan-id>
no ip igmp snooping vlan <vlan-id>
Enable the IGMP Snooping function on the
multicast VLAN. The no form of this command
disables the IGMP Snooping on the multicast
VLAN.
ip igmp snooping
no ip igmp snooping
Enable the IGMP Snooping function. The no
form of this command disables the IGMP
snooping function.
3. Configure the MLD Snooping
ipv6 mld snooping vlan <vlan-id>
no ipv6 mld snooping vlan <vlan-id>
Enable MLD Snooping on multicast VLAN;
the no form of this command disables MLD
Snooping on multicast VLAN.
ipv6 mld snooping
no ipv6 mld snooping
Enable the MLD Snooping function. The no
form of this command disables the MLD
snooping function.
40.3 Multicast VLAN Examples
Figure 40-1: Function configuration of the Multicast VLAN
As shown in the figure, the multicast server is connected to the layer 3 switch switchA through
port 1/1 which belongs to the VLAN10 of the switch. The layer 3 switch switchA is connected
with layer 2 switches through the port1/10, which configured as trunk port. On the switchB the
VLAN100 is configured set to contain port1/15, and VLAN101 to contain port1/20. PC1 and
40-46
User’s Manual of SGS-6341 series