SGS-6341-Series User Manual

38.3.2 IGMP Snooping Configuration Task List
1. Enable IGMP Snooping
2. Configure IGMP Snooping
1. Enable IGMP Snooping
Command Explanation
Global Mode
ip igmp snooping
no ip igmp snooping
Enables IGMP Snooping. The no operation
disables IGMP Snooping function.
2. Configure IGMP Snooping
Command Explanation
Global Mode
ip igmp snooping vlan <vlan-id>
no ip igmp snooping vlan <vlan-id>
Enables IGMP Snooping for specified VLAN.
The no operation disables IGMP Snooping for
specified VLAN.
ip igmp snooping proxy
no ip igmp snooping proxy
Enable IGMP Snooping proxy function, the no
command disables the function.
ip igmp snooping vlan < vlan-id > limit
{group <g_limit> | source <s_limit>}
no ip igmp snooping vlan < vlan-id > limit
Configure the max. group count of vlan and
the max. source count of every group. The “no
ip igmp snooping vlan <vlan-id> limit”
command cancels this configuration.
ip igmp snooping vlan <1-4094> interface
(ethernet | port-channel|) IFNAME limit
{group <1-65535>| source <1-65535>}
strategy (replace | drop)
no ip igmp snooping vlan <1-4094>
interface (ethernet | port-channel|)
IFNAME limit group source strategy
Configure the number of groups which are
allowed joining and the maximum of the
source in each group under the IGMP
Snooping port. Configure the strategy when it
is up to the upper limit, including “replace” and
“drop”. No command configures as “no
limitation”.
ip igmp snooping vlan <vlan-id>
l2-general-querier
no ip igmp snooping vlan <vlan-id>
l2-general-querier
Set this vlan to layer 2 general querier. It is
recommended to configure a layer 2 general
querier on a segment. The “no ip igmp
snooping vlan <vlan-id>
l2-general-querier”command cancels this
configuration.
38-34
User’s Manual of SGS-6341 series