SGS-6341-Series User Manual

Layer 3 Interface Mode
ipv6 dhcp relay remote-id <remote-id>
no ipv6 dhcp relay remote-id
This command is used to set
the form of adding option 37 in
received DHCPv6 request
packets, of which <remote-id>
is the content of remote-id in
user-defined option 37 and it is
a string with a length of less
than 128. The no operation
restores remote-id in option 37
to enterprise-number together
with vlan MAC address.
ipv6 dhcp relay subscriber-id <subscriber-id>
no ipv6 dhcp relay subscriber-id
This command is used to set
the form of adding option 38 in
received DHCPv6 request
packets, of which
<subscriber-id> is the content
of subscriber-id in user-defined
option 38 and it is a string with
a length of less than 128. The
no operation restores
subscriber-id in option 38 to
vlan name together with port
name such as
"Vlan2+Ethernet1/2".
3. Dhcpv6 server option basic functions configuration
Command Description
Global Mode
ipv6 dhcp server remote-id option
no ipv6 dhcp server remote-id option
This command enables
DHCPv6 server to support the
identification of option 37, the
no form of this command
disables it.
ipv6 dhcp server subscriber-id option
no ipv6 dhcp server subscriber-id option
This command enables
DHCPv6 server to support the
identification of option 38, the
no form of this command
35-5
User’s Manual of SGS-6341 series