SGS-6341-Series User Manual

option <code> {ascii <string> | hex
<hex> | ipaddress <ipaddress>}
no option <code>
Configure the network parameter specified
by the option code. The no command
deletes the network parameter specified by
the option code.
lease { days [hours][minutes] | infinite }
no lease
Configure the lease period allocated to
addresses in the address pool. The no
command deletes the lease period allocated
to addresses in the address pool.
max-lease-time {[<days>] [<hours>]
[<minutes>] | infinite}
no max-lease-time
Set the maximum lease time for the
addresses in the address pool; the no
command restores the default setting.
Global Mode
ip dhcp excluded-address
<low-address> [<high-address>]
no ip dhcp excluded-address
<low-address> [<high-address>]
Exclude the addresses in the address pool
that are not for dynamic allocation.
(3) Configure manual DHCP address pool parameters
Command Explanation
DHCP Address Pool Mode
hardware-address <hardware-address>
[{Ethernet | IEEE802|<type-number>}]
no hardware-address
Specify/delete the hardware address
when assigning address manually.
host <address> [<mask> |
<prefix-length> ]
no host
Specify/delete the IP address to be
assigned to the specified client when
binding address manually.
client-identifier <unique-identifier>
no client-identifier
Specify/delete the unique ID of the user
when binding address manually.
3. Enable logging for address conflicts
Command Explanation
Global Mode
ip dhcp conflict logging
no ip dhcp conflict logging
Enable/disable logging for DHCP address to
detect address conflicts.
Admin Mode
clear ip dhcp conflict <address | all >
Delete a single address conflict record or all
conflict records.
31-63
User’s Manual of SGS-6341 series