SGS-6341-Series User Manual

ip dhcp pool <name>
no ip dhcp pool <name>
Configure DHCP Address pool. The no
operation cancels the DHCP Address pool.
(2) Configure DHCP address pool parameters
Command Explanation
DHCP Address Pool Mode
network-address <network-number>
[mask | prefix-length]
no network-address
Configure the address scope that can be
allocated to the address pool. The no
operation of this command cancels the
allocation address pool.
default-router
[<address1>[<address2>[…<address8>
]]]
no default-router
Configure default gateway for DHCP clients.
The no operation cancels the default
gateway.
dns-server
[<address1>[<address2>[…<address8>
]]]
no dns-server
Configure DNS server for DHCP clients. The
no command deletes DNS server
configuration.
domain-name <domain>
no domain-name
Configure Domain name for DHCP clients;
the “no domain-name” command deletes
the domain name.
netbios-name-server
[<address1>[<address2>[…<address8>
]]]
no netbios-name-server
Configure the address for WINS server. The
no operation cancels the address for server.
netbios-node-type
{b-node|h-node|m-node|p-node|<type-n
umber>}
no netbios-node-type
Configure node type for DHCP clients. The
no operation cancels the node type for
DHCP clients.
bootfile <filename>
no bootfile
Configure the file to be imported for DHCP
clients on boot up. The no command
cancels this operation.
next-server
[<address1>[<address2>[…<address8>
]]]
no next-server
[<address1>[<address2>[…<address8>
]]]
Configure the address of the server hosting
file for importing. The no command deletes
the address of the server hosting file for
importing.
31-62
User’s Manual of SGS-6341 series