SGS-6341-Series User Manual

relationship configured by atta
ck packets so that the switch makes mistake on transfer packets,
and takes an effect on the whole network. Or the switches are made used of by vicious
attackers, and they intercept and capture packets transferred by switches or attack other
switches, host computers or network equipment.
What the essential method on preventing attack and spoofing switches based on ARP in
networks is to disable switch automatic update function; the cheater can’t modify corrected
MAC address in order to avoid wrong packets transfer and can’t obtain other information. At
one time, it doesn’t interrupt the automatic learning function of ARP. Thus it prevents ARP
spoofing and attack to a great extent.
28.2 Prevent ARP Spoofing configuration
The steps of preventing ARP spoofing configuration as below:
1. Disable ARP automatic update function
2. Disable ARP automatic learning function
3. Changing dynamic ARP to static ARP
1. Disable ARP automatic update function
Command Explanation
Global Mode
ip arp-security updateprotect
no ip arp-security updateprotect
Disable and enable ARP automatic update
function.
2. Disable ARP automatic learning function
Command Explanation
Global and VLAN Interface Mode
ip arp-security learnprotect
no ip arp-security learnprotect
Disable and enable ARP automatic learning
function.
28-52
User’s Manual of SGS-6341 series