SGS-6341-Series User Manual

6.) Filter the route obtained by OSPF
Command Explanation
OSPF Protocol Configuration Mode
filter-policy <access-list-name>
no filter-policy
Use access list to filter the route obtained by
OSPF, the no command cancels the route
filtering.
3. Disable OSPF protocol
Command Explanation
Global Mode
no router ospf [process <id>]
Disables OSPF routing protocol.
26.5.3 OSPF Examples
26.5.4 Configuration Example of OSPF
Scenario 1: OSPF autonomous system.
This scenario takes an OSPF autonomous system consists of five switch for example.
Figure 26
-4 Network topology of OSPF autonomous system
Switch
A
Switch B
Switch E Switch D
Switch C
E1/2:10.1.1.1
vlan1
E1/1:10.1.1.2
vlan1
E1/1:100.1.1.1
vlan2
E1/1:100.1.1.2
vlan2
E1/2:20.1.1.1
vlan3
E1/1:20.1.1.2
vlan3
E1/2:30.1.1.1
vlan3
E1/1:30.1.1.2
vlan3
Area 1
Area 0
The configuration for Layer 3 Switch1 and Switch5 i
s shown below:
Layer 3 Switch1
Configuration of the IP address for interface vlan1
Switch1#config
Switch1(config)# interface vlan 1
Switch1(config-if-vlan1)# ip address 10.1.1.1 255.255.255.0
26-34
User’s Manual of SGS-6341 series