SGS-6341-Series User Manual

1）Configure how to calculate OSPF SPF algorithm time
2）Configure the LSA limit in the OSPF link state database
3）Configure various OSPF parameters
Command Explanation
OSPF Protocol Configuration Mode
timers spf <interval>
no timers spf
Configure the SPF timer of OSPF; the
no timers spf command restores the
default settings.
overflow database {<max-LSA> [hard | soft]
| external <max-LSA> <recover time>}
no overflow database [external <max-LSA
> < recover time >]
Configure the LSA limit in current OSPF
process database; the no overflow
database [external < max-LSA > <
recover time >] command restores the
default settings.
area <id> {authentication [message-digest]
| default-cost <cost> | filter-list {access |
prefix} <WORD> {in | out} | nssa
[default-information-originate |
no-redistribution | no-summary |
translator-role] | range <range> | stub
[no-summary] | virtual-link <neighbor>}
no area <id> {authentication | default-cost |
filter-list {access | prefix} <WORD> {in |
out} | nssa [default-information-originate |
no-redistribution | no-summary |
translator-role] | range <range> | stub
[no-summary] | virtual-link <neighbor>}
Configure the parameters in OSPF area
(STUB area, NSSA area and virtual
links); the no area <id> {authentication
| default-cost | filter-list {access |
prefix} <WORD> {in | out} | nssa
[default-information-originate |
no-redistribution | no-summary |
translator-role] | range <range> | stub
[no-summary] | virtual-link
<neighbor>} command restores the
default settings.
4）Configure the priority of the interface when electing designated Layer 3 switch (DR).
Command Explanation
Interface Configuration Mode
ip ospf priority <priority>
no ip ospf priority
Sets the priority of the interface in “designated
Layer 3 switch” election; the no ip ospf priority
command restores the default setting.
5）Configure to keep a log for OSPF adjacency changes or not
Command Explanation
OSPF Protocol Configuration Mode
log-adjacency-changes detail
no log-adjacency-changes detail
Configure to keep a log for OSPF adjacency
changes or not.
26-33
（4）Configure other OSPF protocol parameters
User’s Manual of SGS-6341 series