SGS-6341-Series User Manual

Configure the routes of the other protocols to introduce to OSPF.
Command Explanation
OSPF Protocol Configuration Mode
redistribute { bgp | connected | static |
rip | kernel} [ metric-type { 1 | 2 } ] [ tag
<tag> ] [ metric <cost_value> ]
[router-map <WORD>]
no redistribute { bgp | connected |
static | rip | kernel }
Distribute other protocols to find routing and
static routings as external routing messages
the no redistribute {bgp | connected |
static | rip | kernel} command cancels the
distributed external messages.
（3）Configure OSPF importing the routes of other OSPF processes
1）Enable the function of OSPF importing the routes of other OSPF processes
Command Explanation
Router OSPF Mode
redistribute ospf [<process-id>]
[metric<value>] [metric-type
{1|2}][route-map<word>]
no redistribute ospf [<process-id>]
[metric<value>] [metric-type
{1|2}][route-map<word>]
Enable or disable the function of OSPF
importing the routes of other OSPF
processes.
2）Display relative information
Command Explanation
Admin Mode or Configure Mode
show ip ospf [<process-id>]
redistribute
Display the configuration information of the
OSPF process importing other outside
routes.
3）Debug
Command Explanation
Admin Mode
debug ospf redistribute message send
no debug ospf redistribute message
send
debug ospf redistribute route receive
no debug ospf redistribute route
receive
Enable or disable debugging of sending
command from OSPF process redistributed
to other OSPF process routing.
Enable or disable debugging of received
routing message from NSM for OSPF
process.
26-32
（2）Configure OSPF route introduction parameters
User’s Manual of SGS-6341 series