SGS-6341-Series User Manual

User’s Manual of SGS-6341 series
PoE Power Output
Per port 53V DC, 30.8 watts (max.)
Power Pin Assignment
1/2(+), 3/6(-)
PoE Power Budget
370 watts (max.)
PoE Ability PD @ 9 watts
24 units
PoE Ability PD @ 15 watts
24 units
PoE Ability PD @ 30 watts
12 units
Management Function
System Configuration
Console, Telnet, SSH, Web browser, SNMP v1, v2c and v3
Management
Supports both IPv4 and IPv6 addressing
Supports the user IP security inspection for IPv4/IPv6 SNMP
Supports MIB and TRAP
Supports IPv4/IPv6 FTP/TFTP
Supports IPv4/IPv6 NTP
Supports RMON 1, 2, 3, 9 four groups
Supports the RADIUS authentication for IPv4/IPv6 Telnet user name and
password
Supports IPv4/IPv6 SSH
The right configuration for users to adopt RADIUS server’s shell
management
Supports CLI, console, Telnet
Supports SNMP v1, v2c and v3
Supports Security IP safety net management function: avoid unlawful
landing at nonrestrictive area
Supports Syslog server for IPv4 and IPv6
Supports TACACS+
Layer 3 Function
Routing Protocol
Static routing, RIP and OSPF
Routing Table
Total 128 entries (IPv4/IPv6 shared)
Layer 2 Function
Port Configuration
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Bandwidth control on each port
Port loopback detect
Port Status
Display each port’s speed duplex mode, link status, flow control status and
auto negotiation status
VLAN
802.1Q tagged based VLAN, up to 256 VLAN groups
802.1ad Q-in-Q (VLAN stacking)
1-8