SGS-6341-Series User Manual

4. Delete the specified route in RIP route t
able
Command Explanation
Admin Mode
clear ip rip route
{<A.B.C.D/M>|kernel|static|connected|r
ip|ospf|isis|bgp|all}
The command deletes a specified route from the
RIP route table.
5. Configure the RIP routing aggregation
（1） Configure IPv4 aggregation route globally
Command Explanation
Router Mode
ip rip aggregate-address A.B.C.D/M
no ip rip aggregate-address A.B.C.D/M
To configure or delete IPv4 aggregation route
globally.
（2） Configure IPv4 aggregation route on interface
Command Explanation
VLAN Interface Mode
ip rip aggregate-address A.B.C.D/M
no ip rip aggregate-address
A.B.C.D/M
To configure or delete IPv4 aggregation route
on interface.
（3） Display IPv4 aggregation route information
Command Explanation
Admin Mode
show ip rip aggregate
To display aggregation route information.
6. Configure redistribution of OSPF routing to RIP
(1) Enable Redistribution of OSPF routing to RIP
Command Explanation
Router RIP Mode
redistribute ospf [ <process-id> ] [metric
<value> ] [route-map <word> ]
no redistribute ospf [ <process-id> ]
To enable or disable the redistribution of
OSPF routing to RIP.
26-22
User’s Manual of SGS-6341 series