SGS-6341-Series User Manual

maximum-prefix
<maximum-prefix>[<threshold>]
no maximum-prefix <maximum-prefix >
no maximum-prefix
Configure the maximum of RIP route; the no
maximum-prefix <maximum-prefix >
no maximum-prefix command cancels the
limit.
timers basic <update> <invalid>
<garbage>
no timers basic
Adjust the update, timeout and garbage
collection time, the no timers basic command
restores the default configuration.
recv-buffer-size <size>
no recv-buffer-size
The command configures the UDP receiving
buffer size of the RIP; the no recv-buffer-size
command restores the system default values.
3. Configure RIP-I/RIP-II toggling
（1）Configure the RIP version to be used in all ports
Command Explanation
RIP Mode
version { 1 | 2 }
no version
Configure the versions of all the RIP data
packets transmitted/received by the Layer 3
switch port sending/receiving the no version
command restores the default configuration,
version 2.
（2）Configure the RIP version to send/receive in all ports.
（3）Configure whether to enable RIP packets sending/receiving for ports
Command Explanation
VLAN Interface Mode
ip rip send version { 1 | 1-compatible |
2 }
no ip rip send version
Sets the version of RIP packets to send on all
ports; the no ip rip send version command set
the version to the one configured by the version
command.
ip rip receive version {1 | 2 | }
no ip rip receive version
Sets the version of RIP packets to receive on all
ports; the no action of this command set the
version to the one configured by the version
command.
ip rip receive-packet
no ip rip receive-packet
Enables receiving RIP packets on the interface;
the no ip rip receive-packet command close
data receiving on this port.
ip rip send-packet
no ip rip send-packet
Enables sending RIP packets on the interface;
the “no ip rip send-packet” command disables
sending RIP packets on the interface.
26-21
User’s Manual of SGS-6341 series