SGS-6341-Series User Manual

offset-list <access-list-number |
access-list-name> {in | out } <number>
[<ifname>]
no offset-list <access-list-number
|access-list-name> {in|out }<number
>[<ifname>]
Configure that provide a deviation value to the
route metric value when the port sends or
receives RIP data packet; the no offset-list
<access-list-number |access-list-name>
{in|out } <number >[<ifname>] command
removes the deviation table.
4）Configure and apply the route filtering
Command Explanation
Router Mode
distribute-list {< access-list-number
|access-list-name
>|prefix<prefix-list-name>}{in|out}
[<ifname>]
no distribute-list {< access-list-number
|access-list-name
>|prefix<prefix-list-name>}{in|out}
[<ifname>]
Configure and apply the access table and prefix
table to filter the routes. The no distribute-list
{< access-list-number
|access-list-name>|prefix<prefix-list-name>}{
in|out} [<ifname>]command means do not use
the access table and prefix table.
5）Configure the split horizon
Command Explanation
VLAN Interface Mode
ip rip split-horizon [poisoned]
no ip rip split-horizon
Configure that take the split horizon when the
port sends data packets; poisoned for poison
reverse the no ip rip split-horizon command
cancels the split horizon.
（3）Configure other RIP protocol parameters
1）Configure RIP routing priority
2）Configure the RIP route capacity limit in route table
3）Configure timer for RIP update, timeout and hold-down
4）Configure RIP UDP receiving buffer size
Command Explanation
Router Mode
distance <number> [<A.B.C.D/M> ]
[<access-list-name|access-list-number
>]
no distance [<A.B.C.D/M> ]
Specify the route administratively distance of
RIP protocol; the no distance [<A.B.C.D/M> ]
command restore the default value 120.
26-20
User’s Manual of SGS-6341 series