SGS-6341-Series User Manual

Table Of Contents
PC-C:10.1.5.2
Switch B
PC-A:10.1.1.2 PC-B:10.1.4.2
vlan3:10.1.5.1
vlan1:10.1.1.1
vlan2:10.1..2.1 v
lan1:10.1.3.1
vl
an2:10.1.4.1
vl
an2:10.1.2.2 vlan1:10.1.3.2
Switch C
Switch A
Figure 26-1: Static Route Configuratio
ns
Configuration steps:
Configuration of Layer 3 SwitchA
Switch#config
Switch (config) #ip route 10.1.5.0 255.255.255.0 10.1.2.2
Configuration of Layer 3 SwitchC
Switch#config
Next hop use the partner IP address
Switch(config)#ip route 10.1.1.0 255.255.255.0 10.1.2.1
Next hop use the partner IP address
Switch(config)#ip route 10.1.4.0 255.255.255.0 10.1.3.1
Configuration of Layer 3 SwitchB
Switch#config
Switch(config)#ip route 0.0.0.0 0.0.0.0 10.1.3.2
In this way, ping connectivity can be established between PC-A and PC-C, and PC-B and
PC-C.
26-14
User’s Manual of SGS-6341 series