SGS-6341-Series User Manual

26.2.2.2 IPv6 Address Configuration
The configuration Task List of IPv6 is as follows:
1. IPv6 basic configuration
(1) Configure interface IPv6 address
(2) Configure default gateway
2. IPv6 Neighbor Discovery Configuration
(1) Configure DAD neighbor solicitation message number
(2) Configure send neighbor solicitation message interval
(3) Configure static IPv6 neighbor entries
(4) Delete all entries in IPv6 neighbor table
1. IPv6 Basic Configuration
(1) Configure interface IPv6 address
Command Explanation
VLAN Interface Mode
ipv6 address
<ipv6-address/prefix-length>
[eui-64]
no ipv6 address
<ipv6-address/prefix-length>
Configure IPv6 address, including aggregately
global unicast addresses, site-local addresses
and link-local addresses. The no ipv6 address
<ipv6-address/prefix-length> command
cancels IPv6 address.
2. IPv6 Neighbor Discovery Configuration
(1) Configure DAD Neighbor solicitation Message number
Command Explanation
VLAN Interface Mode
ipv6 nd dad attempts <value>
no ipv6 nd dad attempts
Set the neighbor query message number sent in
sequence when the interface makes duplicate
address detection. The no command resumes
default value (1).
(2) Configure Send Neighbor solicitation Message Interval
Command Explanation
VLAN Interface Mode
26-11
User’s Manual of SGS-6341 series