SGS-6341-Series User Manual

23-137
mls qos queue algorithm {sp | wrr | wdrr}
no mls qos queue algorithm
Set queue management algorithm, the
default queue management algorithm is
wrr.
mls qos queue wrr weight
<weight0..weight7>
no mls qos queue wrr weight
Set queue weight based a port, the
default queue weight is 1 2 3 4 5 6 7 8.
mls qos queue wdrr weight
<weight0..weight7>
no mls qos queue wdrr weight
Configure the queue weight according to
the port. The queue weight is 10 20 40
80 160 320 640 1280 as default.
mls qos queue <queue-id> bandwidth
<minimum-bandwidth>
<maximum-bandwidth>
no mls qos queue <queue-id> bandwidth
Configure the bandwidth pledge
according to the port. The range is kbit/s
and the granularity is 64kbit.
5. Configure QoS mapping
Command Explanation
Global Mode
mls qos map {cos-intp <intp1…intp8> |
cos-dp<dp1…dp8> | dscp-intp <in-dscp list>
to <intp> | dscp-dp <in-dscp list> to <dp> |
dscp-dscp <in-dscp list> to <out-dscp>}
no mls qos map {cos-intp | cos-dp | dscp-intp
| dscp-dp | dscp-dscp}
Set the priority mapping for QoS, the no
command restores the default mapping
value.
6. Clear accounting data of the specific ports or VLANs
Command Explanation
Admin Mode
clear mls qos statistics [in
<vlan-id>/<interface> | interface
<interface-name> | vlan <vlan-id>]
Clear accounting data of the specified
ports or VLAN Policy Map. If there are
no parameters, clear accounting data
of all policy map.
7. Show configuration of QoS
Command Explanation
Admin Mode
User’s Manual of SGS-6341 series